20% OFF YOUR FIRST ORDER · NCL26
LINENELLAR
Bag 0
Home Décor Journal · Made to Measure · October 16, 2026

How to Measure a Kitchen Window for Café Curtains

Rest Men's Linen Lounge Shirt

Kitchen measurements are easier to interpret when they are taken from the hardware position. A clear sketch can prevent more confusion than an extra list of unlabeled numbers.

Measure the window in the position where the curtain will work

Record the rod location, usable span and the distance to the desired lower edge. Include nearby taps, handles and any window mechanism that could touch the fabric.

A window has several possible widths: glass, inside frame, outside frame and usable rod span. Write down which one you are measuring instead of treating them as interchangeable. The same applies to length. An intended drop should begin at the agreed hanging reference, not at an unrelated top edge. Install or decide the hardware first where possible, then measure the part of the window the textile will actually occupy.

A realistic decision in your own home

Use a simple sheet with separate lines for opening width, rod span and finished drop. If a bracket reduces the usable span, record the span between the relevant points rather than the rod's overall packaged length. A small distinction at this stage can prevent an awkward adjustment after the curtain arrives.

A practical way to test your idea

Photograph the window straight on, then mark the rod line and intended hem line. Add measurements in one unit so the diagram can be read without conversions.

A common ordering mistake

Do not measure from the top of the whole window when the rod will sit partway down. The hanging point determines the curtain's actual drop.

Should I include extra width for folds myself?

Tell the maker the measured span and your preferred fullness, then agree the finished fabric width. You can include a proposed calculation, but label it as a proposal. The key is to avoid both parties adding extra width independently.

Take measurements in a repeatable order

Begin with the hardware position, then measure the usable span, the intended drop and nearby obstructions. Write each value immediately beside its label rather than collecting several numbers and identifying them later. If there are several windows, finish one labeled set before moving to the next. Measure again from the same reference points and resolve any difference before sending the brief. This process is more useful than adding decimal places to a measurement whose start or finish is uncertain.

Keep the photograph and written brief in agreement

Mark the rod and hem positions on a copy of the window photo, then compare the labels with the written numbers. If the image shows one proposed drop and your message describes another, identify which version is current. For a pair of panels, state whether the width refers to each piece or the total. Retain the final marked image and measurement list together. The aim is a brief that another person can interpret consistently without seeing the room in person.

Make the measuring references visible

A width can refer to glass, frame, opening or usable rod span. Write the description beside the number and mark it on a simple photograph. For the drop, identify the hanging reference and intended hem rather than measuring from a convenient but unrelated edge. Repeat the measurement from the same points before finalizing it. The goal is a brief another person can interpret consistently, not just a list of precise-looking numbers whose meaning depends on being in the room.

Should I send the full window height too?

It can provide context, but label it separately from the requested curtain drop. If the rod sits partway down the window, those values describe different things. The maker needs to know which dimension governs the finished item.

Information What to explain
Usable span and panel count Measure the area where the curtain can actually hang. State one panel or a pair, and identify whether your proposed fabric width is per panel or combined.
Finished drop and heading reference Mark the intended lower edge in a photo. Ask where the chosen design measures its length from, including how the top detail relates to the rod.
Hardware and intended coverage Give the rod diameter, mounting position and any obstruction. Describe the amount of glass you want covered and whether the curtain must move frequently.

Pieces to explore

Shop all · Talk to our studio

Comments (6)

Join the conversation

Your email address will not be published.

Back to Journal

Business information

HỘ KINH DOANH ÁNH HỒNG 1

Business registration no.: 079199013469

contact@linenellar.com

15 Đường 5, khu phố 34, Phường Tam Bình, Thành phố Hồ Chí Minh, Việt Nam

+84 386 113 337

Your bag

No products in the cart.

LINENELLAR · MADE FOR YOU

A personal welcome.

Make your first linen piece yours.

Free standard shipping on 2+ items.
Mix your favourites or choose two of the same piece. No shipping code needed.

20% off

NCL26

For your first order. Use NCL26 in your bag or at checkout. No account needed. One use per customer on your first order. Cannot be combined with other coupons.

Cookie choices are separate from this offer. Privacy