Kitchen measurements are easier to interpret when they are taken from the hardware position. A clear sketch can prevent more confusion than an extra list of unlabeled numbers.
Measure the window in the position where the curtain will work
Record the rod location, usable span and the distance to the desired lower edge. Include nearby taps, handles and any window mechanism that could touch the fabric.
A window has several possible widths: glass, inside frame, outside frame and usable rod span. Write down which one you are measuring instead of treating them as interchangeable. The same applies to length. An intended drop should begin at the agreed hanging reference, not at an unrelated top edge. Install or decide the hardware first where possible, then measure the part of the window the textile will actually occupy.
A realistic decision in your own home
Use a simple sheet with separate lines for opening width, rod span and finished drop. If a bracket reduces the usable span, record the span between the relevant points rather than the rod's overall packaged length. A small distinction at this stage can prevent an awkward adjustment after the curtain arrives.
A practical way to test your idea
Photograph the window straight on, then mark the rod line and intended hem line. Add measurements in one unit so the diagram can be read without conversions.
A common ordering mistake
Do not measure from the top of the whole window when the rod will sit partway down. The hanging point determines the curtain's actual drop.
Should I include extra width for folds myself?
Tell the maker the measured span and your preferred fullness, then agree the finished fabric width. You can include a proposed calculation, but label it as a proposal. The key is to avoid both parties adding extra width independently.
Take measurements in a repeatable order
Begin with the hardware position, then measure the usable span, the intended drop and nearby obstructions. Write each value immediately beside its label rather than collecting several numbers and identifying them later. If there are several windows, finish one labeled set before moving to the next. Measure again from the same reference points and resolve any difference before sending the brief. This process is more useful than adding decimal places to a measurement whose start or finish is uncertain.
Keep the photograph and written brief in agreement
Mark the rod and hem positions on a copy of the window photo, then compare the labels with the written numbers. If the image shows one proposed drop and your message describes another, identify which version is current. For a pair of panels, state whether the width refers to each piece or the total. Retain the final marked image and measurement list together. The aim is a brief that another person can interpret consistently without seeing the room in person.
Make the measuring references visible
A width can refer to glass, frame, opening or usable rod span. Write the description beside the number and mark it on a simple photograph. For the drop, identify the hanging reference and intended hem rather than measuring from a convenient but unrelated edge. Repeat the measurement from the same points before finalizing it. The goal is a brief another person can interpret consistently, not just a list of precise-looking numbers whose meaning depends on being in the room.
Should I send the full window height too?
It can provide context, but label it separately from the requested curtain drop. If the rod sits partway down the window, those values describe different things. The maker needs to know which dimension governs the finished item.
| Information | What to explain |
|---|---|
| Usable span and panel count | Measure the area where the curtain can actually hang. State one panel or a pair, and identify whether your proposed fabric width is per panel or combined. |
| Finished drop and heading reference | Mark the intended lower edge in a photo. Ask where the chosen design measures its length from, including how the top detail relates to the rod. |
| Hardware and intended coverage | Give the rod diameter, mounting position and any obstruction. Describe the amount of glass you want covered and whether the curtain must move frequently. |







Comments (6)