20% OFF YOUR FIRST ORDER · NCL26
LINENELLAR
Bag 0
Home Décor Journal · Made to Measure · October 16, 2026

How to Measure a Round Cushion Insert for a Custom Cover

Measure a round cushion insert through diameter, height and profile. Keep insert dimensions separate from an existing cover and the finished specification.

Rest Men's Linen Lounge Shirt

To prepare a round cushion insert for a custom cover, record two straight diameters and its height/profile. Measure the actual insert you intend to use in its normal, uncompressed shape. Do not turn these object measurements into finished cover dimensions by subtracting an assumed allowance.

Prepare the insert

Remove an old removable cover if that is safe and practical, then let the insert settle on a level surface. Do not press it down to make the numbers neat. Identify whether it resembles a flat pad, a cylindrical cushion with a side wall, or a dome with a changing height.

Photograph the top and side with the same label, for example Cushion A. If the filling shifts easily or one side is noticeably flatter, include that fact. A top-only photograph can conceal the shape that the side panel must accommodate.

Take straight spans, not a tape over the curve

For the first diameter, identify opposite edges across the centre of the top view. Use a straight ruler or a tape held in a straight line to record the span. Do not drape a tape over the dome and call that curved distance a diameter. Repeat across the centre at right angles to the first reading.

If it is difficult to locate the edges without squeezing, use two upright straight edges placed lightly beside opposite sides and measure the gap. Avoid compressing the cushion between them. This gives a practical reference; the studio may request a different method for an unusual profile.

Concept cushion diagram: A straight diameter across the top, B side height on a cylindrical profile; other profiles need an additional description.
A illustrates a straight diameter in the top view; take a second perpendicular reading as well. B marks side height for a cylindrical profile. A domed insert needs its profile explained separately.

Record height without hiding the profile

For a simple cylindrical insert, measure the side height between its lower and upper edges at the side. If the centre rises above the edge, record the overall maximum height separately rather than calling both readings the side height. A dome and a straight side wall require different construction decisions.

An illustrative note might say: “Insert A, top straight spans 45 × 46 cm, side wall approximately 12 cm, centre maximum height 16 cm; soft domed top, photographed without compression.” Those are example readings, not a standard size or a recommendation for the finished cover. Keep both diameters when they differ instead of averaging away an irregular shape.

Reading Label it as Do not substitute
First and second straight span Insert dimensions, with method A curved tape path over the dome
Side height Edge/side-wall reading Maximum centre height without saying so
Maximum height if domed Overall profile reading A claim that the side wall has this height
Existing cover dimensions Separate textile reference The dimensions of the insert inside it

Add an existing cover only as a separate reference

If an old cover fits well, photograph it and label its dimensions separately. Say whether it was measured empty, laid flat and after washing. A stretchy cover can feel comfortable at dimensions that do not transfer to a different woven construction. Explain what you want to improve: less looseness at the edge, a better side profile, or easier removal.

The maker decides the finished cover specification with the chosen fabric and construction. Do not remove a universal amount for negative ease or add a seam allowance to the insert figures.

Confirm the product, not just the diameter

Check whether the listing includes a cover only or an insert, and confirm its actual closure and side construction. A change to the closure or a different profile may need a quote beyond a simple size adjustment.

Cushion A: [product link]. Insert straight spans: [A × B, unit]. Side height: [C, method]. Maximum height/profile: [description]. Existing cover reference, if any: [separate readings]. Desired fit: [preference]. Please confirm the finished cover dimensions, construction, colour and total.

Use the Still Round Linen Cushion Cover as a starting design and the custom service to agree the final specification before making.

Pieces to explore

Shop all · Talk to our studio

Join the conversation

Your email address will not be published.

Back to Journal

Business information

HỘ KINH DOANH ÁNH HỒNG 1

Business registration no.: 079199013469

contact@linenellar.com

15 Đường 5, khu phố 34, Phường Tam Bình, Thành phố Hồ Chí Minh, Việt Nam

+84 386 113 337

Your bag

No products in the cart.

LINENELLAR · MADE FOR YOU

A personal welcome.

Make your first linen piece yours.

Free standard shipping on 2+ items.
Mix your favourites or choose two of the same piece. No shipping code needed.

20% off

NCL26

For your first order. Use NCL26 in your bag or at checkout. No account needed. One use per customer on your first order. Cannot be combined with other coupons.

Cookie choices are separate from this offer. Privacy